System information

Integrating Polycom RMX Systems with Siemens OpenScape
51
» Secondary Server
» Tertiary Server
6 If you are using an RMX 2000, choose LAN Ports and modify the following fields:
Admin Tip: Configuring RMX 1500/4000 and RMX 2000 LAN Port Modes
When configuring the RMX 1500/4000 platforms, you can manually modify automatically
identified speed and transmit/receive mode for each LAN port
that the system uses if required by
the specific switch in the Ethernet Settings dialog.
○ Port Speed You can set the speed and transmit/receive mode manually for LAN 2 Port only.
Do not change the automatic setting of Port 1 and Port 3. Any change to the Port 1 speed will
not be applied.
○ Port Choose port 1, 2, or 3