System information

Deployment Guide for Siemens Enterprise Communications OpenScape Environments
50
○ Static Routes IPv4 Only Table Select the type of router connection:
» Network Defines a connection to a router segment in another network.
» Host Defines a direct connection to an endpoint found on another network.
5 Choose DNS and modify the following fields:
○ MCU Host Name Enter the name of the MCU on the network. The default name is RMX.
○ DNS Choose from one of the following options:
» Off DNS servers are not used in the network.
» Specify Enter the IP addresses of the DNS servers. Note that this field must be enabled to
make the P address fields available.
• Register Host Names Automatically to DNS Servers Select this option to automatically register
the MCU Signaling Host and Shelf Management with the DNS server.
• Local Domain Name Enter the name of the domain where the MCU is installed.
• DNS Servers Addresses You can define address for the following servers up to a maximum of
three servers:
» Primary Server