System information

Integrating Polycom RMX Systems with Siemens OpenScape
49
4 Click Routers, shown next, and modify the following fields:
○ Default Router IP Address Enter an IPv4 or IPv6 IP address for the default router. The
default router is used whenever the defined static routers are unable to route packets to their
destination. The default router is also used when host access is restricted to one default router.
○ Static Routes IPv4 Only Table The system uses Static Routes to search other networks for
endpoint addresses that are not found on the local LAN. You can define up to five routers in
addition to the default router. The order in which the routers display in the list determines the
order in which the system looks for the endpoints on the various networks. If the address is in
the local subnet, no router is used. To define a static route (starting with the first one), click the
appropriate column and enter the required value. Enter values for the following options:
○ Router IP Address Enter the IP address of the router.
○ Remote IP Address Enter the IP address of the entity to be reached outside the local
network. The Remote Type determines whether this entity is a specific component (Host) or a
network.
If Host is selected in the Remote Type field, enter the IP address of the endpoint.
If Network is selected in the Remote Type field, enter of the segment of the other network.
○ Remote Subnet Mask Enter the subnet mask of the remote network.