System information

Deployment Guide for Siemens Enterprise Communications OpenScape Environments

○ IP Version Choose one of the following versions:

» IPv4 Select this option for IPv4 addressing only.

» IPv6 Select this option for IPv6 addressing only.

» IPv4 & IPv6 Select this option for both IPv4 and IPv6 addressing.

○ IPv6 Configuration Method Choose Auto (Stateless) or Manual.

If you choose Auto, the following address are generated:

» Link-Local (For internal use only)

» Site-Local

» Global

If you choose Manual, you can manually enter the following addresses:

» Site-Local

» Global

You cannot manually modify the following address types:

» Link-Local

» Multicast

» Anycast

○ Shelf Management IP Address Enter an IPv4 or IPv6 IP address for the RMX Shelf

Management Server. The IPv4 address of the RMX Shelf Management Server is used by the

RMX Web Client to monitor hardware. The IPv6 address of the RMX Shelf Management Server

is used by the RMX Web Client to monitor hardware. Note that you must use

Internet Explorer

7™ to connect to the RMX Web Client to the RMX using IPv6.

Click the All button to display the IPv6 addresses as follows:

» Auto If selected, Site-Local and Global site addresses are displayed.

» Manual If selected, only the Manual site address is displayed.

○ Subnet Mask Enter the subnet mask of the Control Unit. Note that this field is specific to IPv4

and is not displayed in IPv6 only mode.