System information

Deployment Guide for Siemens Enterprise Communications OpenScape Environments

○ RMX2000_RTM_LAN YES

This flag enables network separation using RTM LAN card for media and is only required when you

use RTM LAN card.

○ ALWAYS_FORWARD_DTMF_IN_GW_SESSION_TO_ISDN YES

This setting allows you to send DTMF tones through an IP-ISDN gateway call and is mandatory if

you use an IP-ISDN Gateway.

○ SEND_SRTP_MKI NO

This setting is required and mandatory if you use TLS.

Creating a Primary Management Network

The primary Management Network is used to control the Polycom RMX system, primarily through the

RMX Web Client application. The Management Network contains the network parameters, such as the

IP address of the Control Unit, that are needed to connect the RMX and the RMX Web Client. The IP

address can be used by the administrator or service personnel to connect to the Control Unit if the RMX

system becomes corrupted or inaccessible.

You can create a private network the first time you power up the RMX system by using a USB key or a

cable to set the Management Network parameters.