System information

Deployment Guide for Siemens Enterprise Communications OpenScape Environments
38
OR
○ In the address bar of your web browser, type in the IP address of your HDX system, press Enter,
and choose Administrator Settings > Network > IP Network. Note that if your system is
password protected, a dialog displays when you choose Administrator Settings.
The IP network screen displays the H.323 settings, as shown next.
2 Configure the following H.323 settings:
○ Enable IP H.323 Check this option to enable IP H.323.
○ Display H.323 Extension Check this option to enter H.323 extensions separately from the
gateway ID on the Place a Call screen. If your system is registered with a gatekeeper, your
H.323 extension displays on the home screen. If you do not check this option, you can make
gateway calls by entering the call information in this format:
gateway ID + ## + extension .
○ H.323 Name Enter the name that gatekeepers and gateways use to identify this HDX system.
You can make point-to-point calls using H.323 names if both systems are registered to a
gatekeeper. The H.323 name is the same as the System Name, unless you change it. Note that
your organization may use a dial plan that defines the names you can use. Note that your
organization may use a dial plan that defines the names you can use.
○ H.323 Extension (E.164) Entering an extension in this field enables you to place point-to-
point calls if both systems are registered with a gatekeeper, and specifies the extension that
gatekeepers and gateways use to identify this system.