System information

Deployment Guide for Siemens Enterprise Communications OpenScape Environments
26
4 In the Edit Subscriber dialog, choose the General tab and enter a number in the Directory Number
field. The number you enter here is used in the SIP configuration of the HDX system as the User
Name field. You can access this number for the HDX in the User Name field of the HDX SIP
settings, as shown in Specifying HDX SIP Settings. You can access this number for the VVX 1500
phone in the SIP settings of a registered line. These SIP settings are available in the Web
Configuration Utility, as shown in Configuring Polycom VVX 1500 and SIP Settings.
5 In the Subscriber dialog, choose the Security tab and enter the user name and password in the
User Name and Password fields, as shown next.
These two fields configure HTTP Digest Authentication. You can access the user name and
password for the HDX system in the Domain User Name and Password fields of the HDX SIP
settings, as shown in Specifying HDX SIP Settings. You can access this number for the VVX 1500 in
the Authentication User ID and Authentication Password fields in the Web Configuration Utility.
Configuring OpenScape Voice Endpoints
This section shows you how to configure OpenScape voice endpoints.
To configure OpenScape Voice Endpoint properties:
1 Open the Common Management Portal.
2 Go to OpenScape Voice > Business Group > Members > Endpoints.
3 Click on the name of the endpoint you want to modify or check.