System information

Deployment Guide for Siemens Enterprise Communications OpenScape Environments
12
Overview of the OpenScape Video Solution
The following diagram illustrates the physical, SIP, and H.323 DMA system layers combined.
Figure 3-5: Overview of Video Architecture
Using Non-SIP Components
You can connect to OpenScape video solution using non-SIP components and signaling, including H.323
signaling, proprietary signaling, legacy ISDN non-IP systems, and dual video solutions that use H.323 and
SIP. You can adapt, extend, or overlay the OpenScape video solution with your existing non-SIP video
deployments.
Connecting H.323 Video Endpoints OpenScape Video
You can use SIP signaling to connect H.323 video endpoints to the OpenScape Video solution in the
following example scenarios:
You can use a Polycom RMX system to connect H.323 video to SIP video endpoints registered to
OpenScape Video.
You can use the Polycom DMA system to support an H.323/SIP Gateway.
You can support H.323 endpoints by using the RMX as a bridge.
You can support H.323 endpoints by using the DMA system as the gateway.