User Manual

Front Panel:

1. Input Port IN1/2

6.35 TRS instruments and XLR micrphones can be connected to AD5

through the input ports IN1/2. In Recording Mode, IN1 stands for the left

channel and IN2 the right channel.

2. Gain Control Knob 1/2

Adjust the preamp gain for input signals at IN1/2 respectively.

3. 48V Phantom Power Switch 1/2

Turn on/oﬀ 48V Phantom Power. When you turn this switch on, phantom

power will be supplied to the XLR jack connected to the IN1/2 ports. Please

turn it on when using a phantom powered microphone.

1. When connecting/disconnecting microphones to AD5, please set the

gain of AD5 to the minimum before turning on/oﬀ 48V Phantom power

to avoid damaging the devices.

2. When connecting devices not requiring 48V phantom power to IN1/2

port, please make sure to turn oﬀ 48V phantom power.

① ②

③ ④ ③ ④ ⑥⑤ ⑦ ⑧

① ②