User Manual

Back Panel:

3. USB Port 1/2

To connect phones/computers to input/output audio signals via the 2 in 1

audio cable. Phones/computers can route audio singals to AD5 and AD5

can achieve the digital output of audio signals from both phones/computers

and IN1/2.

4. 3.5mm Port 1/2

To connect phones to input/output audio signals via the 3.5mm

TRRS-TRRS audio cable. Phones can route audio signals to AD5 and AD5

can achieve analog output of the audio signals from phones and IN1/2.

The 3.5mm port can capture all the audio signals from your phone(e.g.,

the audio signal from a guest on the phone) to AD5. The audio signal from

the phone won't be routed back. Thus the guest on the phone can hear

the whole podcast mix, but without their own voice. This type of mix is

known as 'mix-minus'.

5. 3.5mm Monitoring Port 2

Plug in 3.5mm TRS/TRRS headphones to monitor.

6. Line Output Port

Connect to the monitor speakers, L means the left channel and R the right

channel.

7. Reset Hole

If the device cannot be charged or is unable to function, insert the reset

pin into the reset hole to reset it.

1. Power/Language Switch Button

Long press to turn on/oﬀ; short press to switch the language of AD5

between Chinese and English.

2. USB-C Charging Port

Users can charge AD5 through the 2 in 1 cable.

① ② ③ ④ ⑤ ⑥ ⑦