Two-channel XLR/3.5mm/6.
Foreword Thanks for purchasing COMICA Two-channel XLR/3.5mm/6.35mm Audio Preamp Mixer/Adapter/Interface LinkFlex AD3 Main Features . Support Two-channel Audio Input; . XLR/3.5mm/6.35mm (For Instrument like Guitar etc.,) Audio Adapter Interface; . Universal for Camera and Smartphone; . Support 48V Phantom Power Output; . Audio Preamp and Gain Control ; . Mic/Phone Two-way Audio Monitor; .
Notice When working with other products which have high sensitivity, the gain of our product should be adjusted to the appropriate position to avoid the situation of sonic boom or howling (it is recommended to adjust the gain to the minimum state when the product is turned on, and then adjust it step by step); When the Interface works with iPhone with lightning audio input, you need to use the original adapter cable; For the Android system smartphone, the Interface works well in audio mode, but video mode w
Components and Instruction 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Magic-tape Fixing Slot Belt Clamp Battery Cover Phantom Power Indicator Light Power Indicator Light 3.5mm Audio Monitor Output Jack Phone / Mic Monitor Switch Right Gain-Control Knob Left Gain-Control Knob Left 3.5mm Mono Audio Input Jack Left XLR Mono Audio Input Jack Left 6.35mm Mono Audio Input Jack Right 6.35mm Mono Audio Input Jack Right XLR Mono Audio Input Jack Right 3.
Installation and Usage 1.Battery installation Press the battery cover and open it in the direction of the arrow, Install the 9V battery according to the corresponding positive and negative poles.
Negative Pole 9V Battery Positive Pole Step 3: Install the battery Please note that the positive and negative poles of the battery should correspond to the positive and negative poles of the product 5
2.
3.Left/right mono audio input This product supports XLR/3.5mm/6.35mm audio jack, Please insert the microphone plug into the corresponding jack when using 3.5mm Audio Plug XLR Audio Plug Right Mono Audio Input 6.35mm Audio Plug 3.5mm Audio Plug XLR Audio Plug Left Mono Audio Input 6.35mm Audio Plug The 6.
4.Installation method (Take XLR audio plug for example) 1. After installing the recording device, adjust the output mode according to the device Step 1: Install left and right mono microphones :Smartphone Mode :Camera Mode 2.
5.Left and right channel gain-control knobs Rotate the corresponding audio gain-control knob to adjust the gain of the corresponding audio input channel Left Mono Audio Input Right Mono Audio Input Right Mono Audio Gain Adjustment (Adjust the gain of the Right Mono Audio Input) Left Mono Audio Gain Adjustment (Adjust the gain of the Left Mono Audio Input) 6.
7.Mono/Stereo output switch S: Stereo Mode; M: Mono Mode Stereo Mode Mono Mode When there is only one group microphone connected with this device, then you have to set the M/S to Mono mode 8.Smartphone/Camera output mode switch :Smartphone Output Mode :Camera Output Mode Smartphone Output Mode Camera Output Mode Without the correct switch to the corresponding output mode will result in an unsuccessful recording 9.
Specifications XLR x 2(L/R) Input Interface 6.35mm x 2(L/R) 3.5mm x 2(L/R) Audio Output 3.5mm TRS Monitoring Output 3.5mm TRS/TRRS Frequency Response 20Hz~20kHz, ±1dB Gain Range Maximum increase +30dB THD+Noise <0.
