CVM-WS60 COMBO UHF 1-Trigger-2 Flexible Mini Wireless Microphone User Manual
Foreword Thanks for purchasing COMICA WS60 COMBO UHF 1-Trigger-2 flexible mini wireless microphone. To ensure the correct use and safety of the product, please carefully read this instruction before using and properly assemble and operate. Main Features . 1-Trigger-2, Universal for Smartphone & Camera . Built-in Smartphone Holder Design, Flexible and Convenient . Mini and Compact, Working Distance Up to 60m (Open Area 60m, 30m in Area with Obstacle) . 12 Channels for Multiple Devices Work Together .
Packing List Main Parts: Lavalier Transmitter（TX） Hand-held Transmitter （HTX） Receiver（RX） Purchase Options: WS60 COMBO= 2TX + RX + TX WS60 HTX: 2 + TX RX
Accessories: 1 2 3 4 5 6 7 8 9 10 3.5mm Mic Audio Input Cable 3.5mm TRRS -3.
Components and Instruction Components 1 Lavalier Transmitter (TX) 1 2 3 4 5 6 7 8 9 10 11 1/4 Connecting Hole Reset Hole Belt Clip Connection Hole LCD Screen Group Selection Switch On-off / Muting Button Matching / Muting Status Light Indicator USB-C Charging Interface MIC / LINE IN Input Jack Group Switching Button LCF (Low Cut Filter) Switch 6 7 8 9 4 10 11 5 4 3 2
Hand-held Transmitter (HTX) 1 2 3 4 5 Microphone LCD Display On-off / RF Adjustment Button Group Switching Button AA Battery Tray 1 2 3 A B 4 A B 5 5
Receiver (RX) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Smartphone Clamp Locking Screw 1/4 Connecting Hole Reset Hole 1/4 Connecting Hole Group A Channel Selection Switch Group B Channel Selection Switch On-off Button Group A Working Status Light Indicator Group B Working Status Light Indicator Group A Volume Adjustment Dial Group B Volume Adjustment Dial USB-C Charging Interface 3.5mm Audio Output Jack 3.
Function Button Instruction Long Press Power ON/OFF Lavalier Transmitter (TX) On-off/Muting Button Channel Selection Switch Group Switching Button LCF Switch Muting Mode (The Mute Mode only works Short Press after the screen lighted up) Short Press Channel Selection Push Push Left is Group A Right is Group B Is Low Cut Mode Normal Recording Hand-held Transmitter (HTX) On-off/ Channel Selection Button Long Press Power ON/OFF Short Press Channel Selection Channel Selection Button Push Left A B
On-Off Button Receiver (RX) Channel Selection Switch Group Switching Button Long Power ON/OFF Press Press Short Channel Press Press Channel is to select Group A`s is to select Group B`s Push left to only Push to middle , Open both Push Group A and Group B Push right to only Mono/Stereo Switch Smartphone/Camera Switching Button Group Volume Adjustment , Open Group A , Open Group B Push Mono Mode Stereo Mode Turn Smartphone Mode Camera Mode Turn Group A volume adjustment Group B volume adjustme
Screen Display Lavalier Transmitter Normal Recording Low Cut Filter Antenna Icon Muting Normal Recording Group A/B 10d B Power Indication A 11 579.
Receiver Group B Signal Strength Mono Sound：M Camera Mode： Power Indication S Group A Group B 05 Channel A Smartphone Mode： Stereo Sound：S Group A Signal Strength 6 Group A Volume 11 9 Channel B Group B Audio Receiving Dynamic Bar Group A Audio Receiving Dynamic Bar Group B Volume Stereo Mode A/B Mode M/S Mode S 05 6 Smartphone / Camera Mode 10 11 9
Indicator Light Instruction Lavalier Transmitter RF (TX) Receiver (RX) A RF B RF Normal Recording Status （The status works for transmitter only. Green Light Keeps on The receiver can pick up the sound when channel matched successfully.
The matching methods of Receiver and Transmitter 1. Switch the Receiver’s Group to “A”, “B” or “A/B”, then switch the transmitter’s Group to corresponding “A” or “B” A （Lavilier Transmitter） B （Hand-held Transmitter） （Receiver） One-Triggered-One:Switch the Receiver’s Group to “A”or “B” One-Triggered-Two:Switch the Receiver’s Group to “A/B” 2. Adjust the same group’s channel of receiver and transmitter to be consistent S 05 11 6 9 （Receiver） 10d B A 05 573.
Installation and Usage Lavalier Transmitter (TX) 1.
2. Insert the 3.5mm Mic Audio Input Cable into the MIC/ LINE IN Input Jack 3.
4. Target the Mic to the audio source and check whether the Lavalier Transmitter is working properly according to the audio display bar on the screen. 10dB 06 574.125MHz Audio Dynamic Bar 5. Connect the belt clip to the transmitter through the connection hole 6.
Hand-held Transmitter 1. Install the battery into the hand-held Transmitter’s battery tray according to their positive and negative electrode 2. Long press the On-off Button to start the hand-held transmitter 3.
Receiver 1.
2. Using Methods 2.1 Method one: Using with Tripod 2.1.
2.1.2 Rotate the four clamps to the front side.
2.1.
2.1.
2.1.5 Connect the receiver and your smartphone with 3.5mm-3.5mm Audio Output Cable 22 This product uses 3.
2.1.6 Plug your earphone into “ 3.
2.2 Method two: Using with your Camera 2.2.
2.2.2 Insert the Mic Audio Input Cable into the 3.
2.2.3 Plug your earphone into “ 3.5mm monitoring jack” to realize real time monitoring 3.
Specification Lavalier Transmitter (TX) Channel 12 Duration 8 hours Antenna Built-in Antenna Stray Radiation ﹤-60dBc Sound Delay ﹤20ms Audio Distortion ﹤0.5% Signal/ Noise ﹥65dB Audio Input Socket 3.5mm TRS Battery Li-po Battery 1150mAh 3.7V Dimension 104×65.
Hand-held Transmitter (HTX) 28 Channel 12 Duration 4 Hours Signal/Noise ﹥65dB Antenna Built-in PCB Antenna Stray Radiation ﹤-60dBc Sound Delay ﹤20ms Audio Distortion ﹤0.5% Battery AA Batteries×2pcs Dimension Φ 53.
Receiver (RX) Channel 12 Duration 8 Hours Antenna Built-in Antenna Sensitivity -90dBm Sound Delay ﹤20ms Audio Distortion ﹤0.5% Radiation Frequency 20Hz~18KHz Signal/Noise ﹥65dB Audio Output Socket 3.5mm TRRS Monitor Interface 3.5mm TRS/TRRS Battery Li-po Battery 1150mAh 3.7V Dimension 134.5×65.
The COMICA logo is trademark which is registered and owned by Commlite Technology Co.,Ltd Email: support@comica-audio.
