User`s manual

USER’S MANUAL
-17-
1. Slide the decorated board and move it away as fig.5.2.1 shown; pull the front panel to the outside at a
small angel as fig.5.2.2 shown; and then open the front panel as fig.5.2.3 shown.
2. Lift the protruding part which is in the downside of the air filter, then pull it downward, remove the air
filter away.
3. Clean it with vacuum cleaner or water. If air filter is very dirt, please clean it with warm soapy water or
mild detergent. Then dry it in the shadow.
4. Insert air filter into the previous position, close the front panel. And then push the decorated board to
the original position.
Note:
1. Filter should be cleaned at least once every two weeks. Or heating or cooling capacity will be reduced.
2. Do not clean the air filter with metal brush,or it may be damaged.
3. Four clips must be fixed to the position when close the front panel.
〖No Use for Long Time〗
1. Swing 3-4 hours to dry the internal 2. Stop operation by remote controller, then
air conditioner. pull the plug off.
3. Maintain air filter net. 4. Take out batteries from remote controller.