User`s manual

USER’S MANUAL
-14-
〖COOL,DRY and HEAT OPERATION〗
Remarks:
1. When “DRY” mode is set, in accordance with the D-value between indoor temperature and set temperature, the
air conditioner will start or stop the cooling operation and fan speed automatically to decrease room humidity.
Fan speed can’t be controlled sometimes.
2. When “HEAT” mode is set, you can press” AUH” Button if the room temperature is low. The air conditioner
will decide whether to start the AUH function according to the room temperature and set temperature. When
heating to a certain degree, the air conditioner will stop “AUH” automatically. Press again the “AUH” Button,
the air conditioner will stop AUH and the symbol will disappear on the remote controller. Cooling & Heating
type air conditioner realize the heating function by absorbing heating energy from the air outdoors. If the
temperature outdoors is too low, the heating efficiency will decrease. In that case, please use other heaters.
A
irflow Selection
Press “Fan Sweep”
button to set airflow in
vertical direction.
4
Turn of
f
Press“ON/OFF” button
again to stop the ai
r
conditioner.
6
Turn on
Press“ON/OFF” button
to start the ai
r
conditioner.
3
2
1
5
Temp setting
Press “ ”and “ ” to
adjust the temp as
needed.
Fan speed setting
For selecting indoo
r
fan speed:
A
uto Low
Medium High
A
ON／OFF
TEMP
SMART
AIR EXCHANGE
SWEEP SPEED
H-SWEEP
MODE
Mode setting
For selecting:
COOL DRY
HEAT