Product Brochure

• Zero VOC® – Levels measured

below quantiﬁable levels

• Industry leading sound ratings

STC 72 / IIC 73 / Delta 21

• Anti-Crush technology for excellent

footfall performance and long life

• Industry leading vapor barrier

• Excellent over radiant heated ﬂoors

• Use over concrete and wood substrates

above or below grade

• B2 ﬁre rating

Up to 93% of heat/air conditioning lost through your oor is primarily due to the penetration of Radiant energy (compare

this to energy lost by Conducton at only 7% and losses through Convection at 0%). The fused aluminium lm prevents

radiant energy rays from penetrating down, relfecting them back into your home where they are absorbed in the form of

heat or air conditioning energy. This relationship of reection and absorption is what makes ComfortBoost™ provide a

“comfort” that you can really feel.

CONCRETE WOOD

COMFORTBOOST™

2mm

Made in China

VTCFBLB100 07/2017

841725001336

100sq.ft. / roll

MADE IN NORTH AMERICA

FABRIQUÉ AU L'AMÉRIQUE DU NORD

Made in North America using Domestic and Foreign Materials

Resaca, GA • Hickory, NC • Cambridge, ON, Canada

PAGE 1
TM • Zero VOC® – Levels measured below quantifiable levels • Industry leading sound ratings STC 72 / IIC 73 / Delta 21 • Anti-Crush technology for excellent footfall performance and long life • Industry leading vapor barrier • Excellent over radiant heated floors • Use over concrete and wood substrates above or below grade • B2 fire rating Up to 93% of heat/air conditioning lost through your floor is primarily due to the penetration of Radiant energy (compare this to energy lost by Conducton at only 7% a
PAGE 2
TM Installation Instructions 1. Check for nails. 2. Sweep or damp mop. 3. Roll out one width of membrane. 4. Flip over so foil faces up. 5. Cut roll at the wall. 6. Install flooring planks. 7. Roll out next width. 8. Seal seams with tape. (Basement application or over concrete a vapour barrier tape is required.) Repeat steps 3 to 7 until floor is completed. NOTE: When installing ComfortBoost™ in basement or where a moisture barrier is required, extend the underlayment 1” - 2” up the sides of all walls.