Owner`s manual

6
Temp. Down
Temp. Up
Mode
Power
Timer
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V, 60Hz power outlet. and
turn on the master power switch in the rear of the unit. Only operate heater in upright position
with caster wheels attached.
When using remote control, please pull out the battery insulating film as shown below.
PULL
Remote control
Insulating film
Battery cover
Remote Control
Mode button: Used for mode selection
ON/OFF button: Used for power-on or power-off when master
power switch on rear of unit is on
Temp up button: to increase set temperature
Temp down button: to reduce set temperature
Timer button: used for setting timer and adjust time value of the timer