User`s manual

23
Remapping
The "Remapping" mode allows you to remap your keyboard (reassign
keys to different key locations). This can be useful for software
applications that require the repeated use of one or more specific keys;
it is also useful for users who simply find it more convenient to have
various keys rearranged.
1. Press Shift - Ctrl - Insert to enter "keyboard programming" mode.
Num_Lock LED will turn ON.
2. Press Ctrl - Print Screen to enter "Remapping" mode.
Caps_Lock LED will turn ON.
3. Press the key that your are Remapping to. LED 2 (Caps Lock)
will turn OFF and LED 3 “Scroll_Lock” will turn ON.
5. Press the key you wish to be mapped into the key you pressed in Step
three, Scroll_Lock LED will turn OFF.
6. Press Ctrl - F12 to Save & exit "keyboard programming" mode,
If you make a mistake, Press Ctrl- F11 instead of Ctrl F12 and start
over.
How to erase a remapped key.
1-Press Shift - Ctrl - Insert to enter "keyboard programming" mode.
Num Lock LED will turn ON.
2-. Press Ctrl - Print Screen to enter "Remapping" mode. Caps_Lock
LED will turn ON.
3-Press the remapped key that you are going to erase. LED 3 (Scroll Lock)
will turn ON.
4- Press the same key again, this will remap the key to it self, LED 3 (Scroll
Lock) will turn OFF
5. Press Ctrl - F12 to Save & exit "keyboard programming" mode.