User`s manual

13
POSITIONING THE COMFORT KEYBOARD
SYSTEM FOR YOU
WARNING: IF YOU DO NOT LOOSEN THE DISC LOC
COMPLETELY (UNTIL IT STOPS) BEFORE ADJUSTING. YOU MAY
DAMAGE IT PERMANENTLY. Insufficient tightening or insufficient
loosening may damage the Disc Loc Universal Mount
1. Make sure the keyboard is Unplugged.
2. The Disc Loc tm Universal Mounts operate exactly as do standard
screws: counterclockwise loosens, and clockwise tightens. To
loosen a Disc Loc, turn disc counterclockwise 1/3 to ½ turn, until it
stops. That section now can be raised, lowered, tilted, rotated and
moved left or right along the base.
3. To lock a section in the desired position, grasp the section
firmly and hold it steady; tighten the disc by turning the disc
clockwise until the section is locked securely in place.
4. To extend the space bars for comfortable placement of
the thumbs, use the space bar tab to push the extender
toward the center of the keyboard. To return the space
bar to its original length, push the extender back gently.