User`s manual

SETTING UP THE COMFORT KEYBOARD

1. With your host (computer) turned off, or your terminal disconnected,

disconnect your old keyboard cable from the computer’s keyboard port

and remove your old keyboard.

2. Place the Comfort Keyboard System on your work surface.

3. Connect the three keyboard sections using the two section-to-section

coiled cables.

4. (PC) Plug one side of the 6 pin mini DIN cable to the top side of the

Numeric Section. Making sure that the pins are aligned.

5.(PC) Plug the other side of the 6 pin mini DIN cable into the

computer's keyboard port, making sure that the pins are aligned.

Important: there may be special instructions in the Appendix applicable to

your particular computer system.

Important: on systems using devices downline from the keyboard, all

downline devices should be connected before turning your computer ON.

6.Position and adjust the sections of the Comfort Keyboard so they

are most comfortable for you, as outlined in the following section.