Specifications

HEATING/HVAC REGISTER BOOT
65-26
We can become your single-source supplier
on many of the products you currently use!
REGI ST E R BOOT
NOTE: Galvanized pipe to be used for gas heating, ventilation, and air conditioning only. Not to be
used for solid fuel venting.
REGI ST E R BOOT
REGISTE R BO OT
NOTE 1: Galvanized pipe to be used for gas heating, ventilation and air conditioning only. Not to be
used for solid fuel venting. {enote} {note2}NOTE 2: For Galvanized increasers and reducers, the
crimped end should always be on top to allow exhaust to flow into the next piece of pipe. Exhaust
will not be able to escape from the openings at the crimped end.
REGISTE R BO OT
NOTE 1: Galvanized pipe to be used for gas heating, ventilation, and air conditioning only. Not to be
used for solid fuel venting.
REGISTE R BO OT
Imperial Mfg Group
Galvanized Adjustable Elbow - 90° adjustable rounded double
seams permit each section to turn freely without any chance of
becoming disconnected. Elbows can be adjusted to
any angle between a straight line and a right angle.
Product
No.
Mfg.
No. Description
Order
Mult. Weight
Unit
Cost
427306-D GV0281-C 3" diameter, 28-gauge 1/0/8 .400 2.99 EA
408945-D GV0282-C 3" diameter, 30-gauge 1/0/8 .300 2.79 EA
425516-D GV0284-C 4" diameter, 26-gauge 1/0/8 .599 3.49 EA
427314-D GV0285-C 4" diameter, 28-gauge 1/0/8 .500 2.99 EA
408954-D GV0286-C 4" diameter, 30-gauge 1/0/8 .400 2.79 EA
414153-D GV0289-C 5" diameter, 26-gauge 1/0/8 .799 4.29 EA
427322-D GV0290-C 5" diameter, 28-gauge 1/0/8 .599 3.49 EA
408981-D GV0291-C 5" diameter, 30-gauge 1/0/8 .500 2.99 EA
415811-D GV0293-C 6" diameter, 24-gauge 1/0/8 1.598 5.49 EA
415116-D GV0294-C 6" diameter, 26-gauge 1/0/8 1.199 4.49 EA
427330-D GV0295-C 6" diameter, 28-gauge 1/0/8 1.099 3.99 EA
409631-D GV0296-C 6" diameter, 30-gauge 1/0/8 .800 3.29 EA
415820-D GV0298-C 7" diameter, 24-gauge 1/0/8 1.998 7.49 EA
415429-D GV0299-C 7" diameter, 26-gauge 1/0/8 1.598 6.29 EA
479616-D GV0300-C 7" diameter, 28-gauge 1/0/8 1.515 5.79 EA
412333-D GV1329-C 7" diameter, 30-gauge 1/0/8 1.399 4.99 EA
416295-D GV0301-C 8" diameter, 24-gauge 1/0/8 2.398 9.29 EA
415697-D GV0302-C 8" diameter, 26-gauge 1/0/8 1.798 7.49 EA
479594-D GV0303-C 8" diameter, 28-gauge 1/0/8 1.598 6.79 EA
412921-D GV1330-C 8" diameter, 30-gauge 1/0/8 1.400 5.99 EA
479586-D GV0304-C 9" diameter, 24-gauge 1/0/8 2.825 11.49 EA
479608-D GV0306-C 9" diameter, 28-gauge 1/0/8 2.525 8.29 EA
479632-D GV0307 10" diameter, 24-gauge 1/0/8 3.100 14.49 EA
439304-D GV0309 10" diameter, 28-gauge 1/0/8 2.400 13.79 EA
479624-D GV0310 12" diameter, 24-gauge 1/0/8 3.788 16.99 EA
Imperial Mfg Group
Galvanized Increaser - For single wall pipe. Large end is crimped.
Product
No.
Mfg.
No. Description
Order
Mult. Weight
Unit
Cost
425680-D GV1418 3" x 4", 24-gauge 1/0/10 .600 8.49 EA
411263-D GV1419 4" x 5", 24-gauge 1/0/10 .800 8.79 EA
479799-D GV0766-A 4" x 5", 30-gauge 1/0/10 .350 5.99 EA
411281-D GV1420 4" x 6", 24-gauge 1/0/12 .800 9.29 EA
479780-D GV0767-A 4" x 6", 30-gauge 1/0/12 .800 6.79 EA
411325-D GV1358 5" x 6", 24-gauge 1/0/12 1.000 9.29 EA
479802-D GV0769-A 5" x 6", 30-gauge 1/0/12 .400 6.49 EA
411334-D GV1359 6" x 7", 24-gauge 1/0/12 1.000 9.79 EA
411496-D GV1360 6" x 8", 24-gauge 1/0/10 1.000 9.99 EA
411682-D GV1361 7" x 8", 24-gauge 1/0/12 1.000 10.49 EA
Imperial Mfg Group
Galvanized Reducer - For single wall pipe. Small end is crimped.
Product
No.
Mfg.
No. Description
Order
Mult. Weight
Unit
Cost
425672-D GV1415 4" x 3", 24-gauge 1/0/10 .600 8.79 EA
479721-D GV0808-A 4" x 3", 28-gauge 1/0/10 .300 5.49 EA
411691-D GV1416 5" x 4", 24-gauge 1/0/10 .800 8.79 EA
479772-D GV0810-A 5" x 4", 28-gauge 1/0/10 .300 7.29 EA
411762-D GV1417 6" x 4", 24-gauge 1/0/12 .792 8.79 EA
411771-D GV1349 6" x 5", 24-gauge 1/0/12 1.000 9.29 EA
411922-D GV1350 7" x 6", 24-gauge 1/0/12 1.000 9.79 EA
479748-D GV0816 7" x 6", 28-gauge 1/0/12 .800 6.79 EA
412182-D GV1351 8" x 6", 24-gauge 1/0/10 1.000 9.79 EA
479764-D GV0821 8" x 6", 28-gauge 1/0/10 .850 6.79 EA
412324-D GV1352 8" x 7", 24-gauge 1/0/12 1.000 10.49 EA
479756-D GV0822 8" x 7", 28-gauge 1/0/12 .933 6.79 EA
439266-D GV1353 10" x 8", 24-gauge 1/0/10 1.000 13.79 EA
Imperial Mfg Group
Galvanized Register Boot - Universal. 30-gauge.
Product
No.
Mfg.
No. Description
Order
Mult. Weight
Unit
Cost
425532-D GV0698-C 2-1/4" x 10" x 6" 1/0/6 .600 6.29 EA
439993-D GV0699-C 2-1/4" x 12" x 6" 1/0/6 .667 6.79 EA
425842-D GV0702-C 3-1/4" x 10" x 6" 1/0/6 .700 8.79 EA
439939-D GV0704-C 4" x 10" x 6" 1/0/6 .700 6.49 EA
425540-D GV0705-C 4" x 12" x 6" 1/0/6 .900 7.29 EA
439895-D GV0711 4" x 12" x 7" 1/0/12 1.000 7.29 EA
439831-D GV0707 6" x 10" x 6" 1/0/8 .800 9.79 EA
452939-D GV0708 6" x 12" x 6" 1/0/12 1.000 9.29 EA
Imperial Mfg Group
Galvanized Register Boot - 90° angle.
Product
No.
Mfg.
No. Description
Order
Mult. Weight
Unit
Cost
479969-D GV0610 2-1/4" x 12" x 5", 30-gauge 1/0/15 .627 7.49 EA
425559-D GV0620-C 2-1/4" x 10" x 6", 30-gauge 1/0/6 .800 6.79 EA
440204-D GV0621-C 2-1/4" x 12" x 6", 30-gauge 1/0/6 .900 7.49 EA
425869-D GV0624-C 3-1/4" x 10" x 6", 30-gauge 1/0/6 .800 6.99 EA
439822-D GV0626-C 4" x 10" x 6", 30-gauge 1/0/6 1.000 6.99 EA
440213-D GV0627-C 4" x 12" x 6", 30-gauge 1/0/6 1.000 7.49 EA
452920-D GV0634 4" x 12" x 7", 28-gauge 1/0/10 1.000 10.49 EA