Specifications

HEATING/HVAC GAS VENT PIPE
65-24
Some prices shown may vary due to market fluctuations,
and are to be used as estimates.
GAS VENT PIPE
GAS VENT PIPE
GAS VENT PIPE
C = 15.75", D = 1.63" No. 8T-DSA: A = 7.94", B = 8.21", C = 15.75", D = 1.63" No. 6T-DSAC: A =
5.94", B = 15.75" No. 8T-DSAC: A = 7.94", B = 15.75"
GAS VEN T PI PE
NOTE 1: SSII type HT chimney pipe and accessories for venting residential heating appliances
burning natural and LP gas, No. 2 oil, and wood. It has been specifically designed for today’s
modern, high-efficiency airtight wood stoves, or as they are termed; solid fuel wood burning
fireplaces. It is also suitable for wood burning heaters and for combination fuel central heating
furnaces.
GAS VEN T PI PE
GAS VEN T PI PE
GAS VEN T PI PE
Selkirk LLC
Gas Vent Storm Collar -
A = 1-9/16".
Product
No.
Mfg.
No. Description
Order
Mult. Weight
Unit
Cost
441515-D 3RV-SC Size: 3", B = 6-5/8" 1/0/6 .167 1.99 EA
441524-D 4RV-SC Size: 4", B = 7-5/8" 1/0/6 .333 2.29 EA
441533-D 5RV-SC Size: 5", B = 8-5/8" 1/0/6 .333 4.49 EA
441542-D 6RV-SC Size: 6", B = 9-5/8" 1/0/6 .333 4.79 EA
Selkirk LLC
Storm Collar - Designed to fit on the round chimney pipe just above
the roof flashing.The upper edge should be
waterproofed with plastic sealer to prevent
any water from leaking between the storm
collar and chimney pipe. Part is tightened
with screws or tabs after proper positioning.
B = 5-1/2".
Product
No.
Mfg.
No. Description
Order
Mult. Weight
Unit
Cost
401023-D 6T-SC A = 8" 1/0/4 .500 8.79 EA
403600-D 8T-SC A = 10" 1/0/4 .750 11.49 EA
Selkirk LLC
Dripless Smoke Pipe Adapter - Used to connect either model DS
smoke pipe or single wall stove pipe to SSII type HT insulated
chimney pipe. The part is designed to slip inside single
wall stove pipe to contain any creosote dripping down the
chimney on the inside of the pipe system. There are 2
dripless smoke adapters:
(1) (DSA)-without coupler.
For use in retrofit installations, this part can be installed
from below with a finish support package and secured
with screws.
(2) (DSAC)-with coupler.
For use in new installations, this part can be installed by
twist-locking the coupler on the DSAC into the first section
of Model SSII type HT chimney pipe.
Product
No.
Mfg.
No. Description
Order
Mult. Weight
Unit
Cost
405500-D 6T-DSA A = 5.94", B = 6.21", 1/0/4 1.030 37.99 EA
405172-D 8T-DSA Dripless Adapter 1/0/4 1.030 42.99 EA
410551-D 6T-DSAC Dripless Adapter 1/0/4 2.750 47.49 EA
410543-D 8T-DSAC Dripless Adapter 1/0/4 3.500 52.99 EA
Selkirk LLC
3-Piece Chimney Kit - Contains 1 round top, 1 storm collar, and 1
roof flashing (either 6T-AF6 or 8T-AF6). For use with
SSII Type HT chimneys.
Product
No.
Mfg.
No. Description
Order
Mult. Weight
Unit
Cost
405074-D 6T-RTK 6" 0/0/1 7.000 114.99 EA
405118-D 8T-RTK 8" 0/0/1 10.000 169.99 EA
Selkirk LLC
Pellet Stove Pipe - 3" Type L insulated pipe for pellet stove
applications. Pipe and fittings overlap 1-1/2" when
jointed. Assembled length is 1-1/2" less than listed
lengths.
Product
No.
Mfg.
No. Description
Order
Mult. Weight
Unit
Cost
468800-D 3VP-6 3" x 6", galvanized 1/0/6 .667 13.79 EA
405884-D 3VP-12 3" x 12", galvanized 1/0/6 1.333 17.49 EA
405876-D 3VP-24 3" x 24’, galvanized 1/0/6 1.833 22.49 EA
405833-D 3VP-36B 3" x 36", black 1/0/6 4.000 34.99 EA
467626-D 3VP-36L 3" x 36", galvanized 1/0/6 4.000 31.49 EA
468819-D 3VP-60B 3" x 60", black 1/0/6 5.500 52.99 EA
Selkirk LLC
Adjustable Length Pellet Stove Pipe - Maximum installed 10-1/
2" pellet stove pipe. Adjustable to 8" shorter. 3" I.D. x 12" overall length.
Product
No.
Mfg.
No. Description
Order
Mult. Weight
Unit
Cost
443602-D 3VP-EZAJ12B Black 1/0/6 8.000 26.99 EA
467618-D 3VPEZAS12 Galvanized 1/0/6 1.333 22.99 EA
Selkirk LLC
Pellet Stove Pipe Elbow - 3", 45° elbow. Type L insulated pipe for
pellet stove applications. A = 3-7/16".
Product
No.
Mfg.
No. Description
Order
Mult. Weight
Unit
Cost
443620-D 3VP-45ELB Black 1/0/6 8.000 34.49 EA
406090-D 3VP-45EL Galvanized 1/0/6 .833 29.99 EA