Installation manual

www.desatech.com
111161-01K 19
4. Locate pegs on bottom of crossover log
(#4). Slide pegs into holes located in
middle log (#2) and back log (#3). See
Figure 26, for placement.
5. Locate pegs on bottom of crossover log
(#5). Slide pegs into holes located in
crossover log (#4) and front log (#1). See
Figure 27.
6. Locate pegs on bottom of crossover log
(#6). Slide pegs into holes located in
middle log (#2) and front log (#1). See
Figure 28.
INSTALLATION
Continued
Figure 26 - Installing Crossover Log (#4)
(CCL3930PR/NR Shown)
Log #2
Log #3
Pegs
Figure 27 - Installing Crossover Log (#5)
(CCL3930PR/NR Shown)
7
Figure 29 - Installing Crossover Log
(#7) to Models CCL3930PR/PRA and
CCL3930NR/NRA Only
Middle Log
(#2)
Crossover
Log (#6)
Holes
Pegs
Figure 28 - Installing Crossover Log (#6)
(CCL3930PR/NR Shown)
Crossover
Log (#4)
Front Log (#1)
6
Pegs
Log #2
Front Log (#1)
7.  Locate holes
on bottom of crossover log (#7). Slide
onto pegs located in crossover log (#6)
and middle log (#2). See Figure 29.
8. Add lava rock around base of heater if
desired. Do not place any lava rock on
logs or burner.