User manual

Micro Receiver DT20
8
Example 1: Pairing a Micro Receiver DT20 into an exist-
ing Comfort Digisystem consisting of one Conference
Microphone DC10 and one Receiver DH10:
1. Connect the Micro Receiver DT20 to the hearing
instrument’s audio shoe according to the
instructions.
2. Initiate pairing mode in the DT20 by pressing
the push-button for 2 seconds.
Acoustic indication:
•
•
3. Start the Conference Microphone DC10.
4. Rapidly press the pairing button on the DC10 twice.
The display on the DC10 responds with the text
“Info sent”.
5. The Micro Receiver DT20 confirms success-
ful pairing with an acoustic indication:
••
Example 2: Make a new eavesdrop secure configu-
ration with one Microphone DM10 and two hearing
instruments with Micro Receiver DT20s:
1. Connect the Micro Receiver DT20s to the hearing
instrument’s audio shoes according to the
instructions.
2. Activate pairing mode in the two DT20’s by pressing
the push-buttons for 2 seconds.
Acoustic indication:
•
•
3. Start the Microphone DM10 and open the menu.
Select Communication/Pairing/New code key and
answer Yes if you want to create a new code key and
transmit it.
4. The Micro Receiver DT20s confirm success-
ful pairing with an acoustic indication:
••
Example 3: Make a new eavesdrop secure configura-
tion with one Microphone DM10 and two Micro Receiver
DT20s using the Programmer DT20:
1. Put one of the Micro Receiver DT20s into the
Programmer DT20.
2. Start the Programmer DT20 and connect head
phones or a neck loop to be able to listen.
3. Activate pairing mode for the DT20 by pressing the
push-button for 2 seconds.
In the headphones/neckloop you receive an acoustic
indication:
•
•
4. Start the Microphone DM10 and open the menu.
Select Communication/Pairing/New code key and
answer Yes if you want to create a new code key and
transmit it.
5. The Micro Receiver DT20 confirms success-
ful pairing with an acoustic indication:
••
6. Remove the paired DT20 and connect the other
DT20 into the Programmer DT20.
7. Activate pairing mode on the DT20 by pressing the
push-button for 2 seconds.
In the headphones/neckloop you receive an acoustic
indication:
•
•
8. Open the menu on the DM10 and select
Communication/Pairing/Send info .
9. The Micro Receiver DT20 confirms success-
ful pairing with an acoustic indication:
••
9) Pairing
The Micro Receiver DT20 can receive but not transmit pairing information. To pair the Micro Receiver DT20 with your
Comfort Digisystem transmitter the Micro Receiver DT20 must be connected either to your hearing instrument
or to the Programmer DT20.
Press the push-button on the Micro Receiver DT20 for 2 seconds to activate pairing mode.
When pairing mode is activated, you receive an acoustic indication:
•
•
Send the pairing information within 15 seconds.
To interrupt pairing mode, briefly press the push-button.