User manual

7
Micro Receiver DT20
Getting started
Connect the Micro Receiver DT20 to the audio shoe on the hearing instru-
ment. Check that the audio shoe is connected to the hearing instrument ac-
cording to the manufacturer’s instructions.
Make sure that the Micro Receiver DT20 is fitted in the correct manner and
push the Euro-plug completely into the socket of the audio shoe.
The Micro Receiver DT20 is powered by the hearing instrument’s battery.
Make sure that the battery is fresh. If you are unsure, replace the battery.
The Micro Receiver DT20 will start automatically when it’s connected to the
hearing instrument. Briefly press the push-button on the Micro Receiver DT20
to turn it on or off again.
OK!
NOT OK!