User manual

13
Micro Receiver DT20
Example 3: Make a new eavesdrop secure configuration with one Micro-
phone DM90 and two Micro Receiver DT20s using the Programmer DT20:
1. Put one of the Micro Receiver DT20s into the Programmer DT20.
2. Start the Programmer DT20 and connect headphones or a neck loop to
be able to listen.
3. Activate pairing mode for the DT20 by pressing the push-button for
2 seconds.
In the headphones/neckloop you receive an acoustic indication: •
•
4. Start the Microphone DM90 and open the menu. Select Communication/
Pairing/New code key and answer Yes to the question of whether you
want to create a new code key and transmit it.
5. The Micro Receiver DT20 confirms
successful pairing with an acoustic indication:
••
6. Remove the paired DT20 and connect the other DT20
into the Programmer DT20.
7. Activate pairing mode on the DT20 by pressing the push-button for
2 seconds.
In the headphones/neckloop you receive an acoustic indication: •
•
8. Open the menu on the DM90 and select Communication/Pairing/Send
info .
9. The Micro Receiver DT20 confirms successful
pairing with an acoustic indication:
••