User manual

Speaker DS-10/DS-20

First use

Positioning of speakers

Speakers should preferably be positioned at the very front of the class-

room and high up towards the ceiling; see the example below with two

speakers.

A wall bracket and a oor stand for Speaker DS-05/DS-10/DS-20 are

available as original accessories.

Passive speaker Speaker DS-05 can be connected via the supplied cable

to the socket marked EXT SPKR on the back of DS-10/DS-20.

Start

Start Speaker DS-10/DS-20 by pressing the On/Off button on the back of

the active speaker.

Receiver 1 and 2 (DS-20 only) are started from the back of DS-10/DS-20,

using the controls marked WR1 or WR2.

Before adjusting the volume, the receivers in DS-10/DS-20, as well as

the wireless microphones, must be set to the right channel and code

key; see menu sections Receiver WR1 and Receiver WR2.