User manual
16
Speaker DS-10/DS-20
More functions
Function indicator
When a receiver is set to receive pairing information, the function
indicator ashes red.
On receiving pairing information the function indicator shows red
for three seconds.
On sending pairing information, the function indicator ashes red
ve times.
Charging
Connect the power unit to the charging socket. Charging can
also take place when the speaker is being used.Never charge
the product in an unventilated space such as a bag, a case or any
other enclosed storage area.
Charge indicator
During rapid charge, the charging indicator ashes red before
changing to a constant green light when it is fully charged.
Battery status indicator
When the battery is low, the battery status indicator comes on red.
Switching off the DS-10/DS-20 during mains operation
Normally DS-10/DS-20 is switched off using the On/Off button on
the back of the unit.
Disconnect the battery (mains operation without battery)
If DS-10/DS-20 is permanently installed in a place where the On/
Off button is difcult to access, it is instead possible to turn DS-
10/DS-20 off by cutting the power to the power unit.
NB! In such cases, however, the battery must be disconnected. To
do this, open the battery cover and disconnect at least one of the
at pin sleeves from the battery.