User manual

12
Speaker DS-10/DS-20
Receive pairing information
The option Receive info makes receiver no. 2 (WR2) ready to receive
pairing information from any Comfort Digisystem unit that sends info.
Example: Speaker DS-20 must reproduce the sound picked up by an
existing Microphone Mini DM-05. Get Speaker DS-20 ready to receive info
as above. Then press the pairing button on DM-05 quickly twice to Send
info. OK! now appears in the display on DS-20.
New code key
For Comfort Digisystem to be interception-proof, a unique code key
needs to be used in the system. The option New code key makes it
possible to generate a new code key and send info from Speaker DS-20
to any Comfort Digisystem unit. Example: A Microphone DM-10 should be
used together with a Speaker DS-20; the system must be interception-
proof. Hold the pairing button on DM-10 in for a few seconds to make the
unit ready to receive pairing information. Then send the new code key
from DS-20 as in the menu picture above.
The option Send info sends information about both the code key and the
channel from Speaker DS-20 to the Comfort Digisystem units that have
been activated to receive info. Example: On Microphone DM-10 select
Communication – Pairing – Receive info. Then carry out Send info as in
the illustration above. DM-10 shows that pairing was carried out when
the text OK! appears in the display. The sound is transferred from Micro-
phone DM-10 to Speaker DS-20.
Pairing Receiver WR2
Send pairing information