User manual

10
Speaker DS-10/DS-20
The squelch level can be adjusted from 0-10. The higher the squelch
value, the stronger the radio signal required for the receiver to work.
The receivers in Speaker DS-10/DS-20 are extremely sensitive and
are thus able to receive weak signals. Raise the squelch value if the
receiver is open to radio channels from other transmitters that must not
be intercepted. With weaker radio signals (possible interference), the
receiver will be silent. The default setting for the squelch level is 2.
Squelch WR1
Receive pairing information
The option Receive info makes receiver no. 1 (WR1) ready to receive
pairing information from any Comfort Digisystem unit that sends info.
Example: Speaker DS-10/DS-20 must reproduce the sound picked up by
an existing Microphone Mini DM-05. Get Speaker DS-10/DS-20 ready to
receive info as above. Then press the pairing button on DM-05 quickly
twice to Send info. OK! now appears in the display on DS-10/DS-20.
New code key
For Comfort Digisystem to be interception-proof, a unique code key
needs to be used in the system. The option New code key makes it
possible to generate a new code key and send info from Speaker DS-
10/DS-20 to any Comfort Digisystem unit. Example: A Microphone
DM-10 is used together with a Speaker DS-20 and the system must be
interception-proof. Hold the pairing button on DM-10 in for a few seconds
to make the unit ready to receive pairing information. Then send the new
code key from DS-20 as in the menu picture above.