User manual
6
Programmer DT05
Menu in the DT05
R enable
R
R+M enable
R+M
Tone ind.
Auto sleep
Pairing
Always on
Send all
Settings
- HA scanner
- Language
- Factory Reset
- About
Back (relates to both the main menu and submenus)
Here you can choose to return to the menu and to the main display.
R enable
Enables selection of R mode with the push-button on the Receiver DT10.
R
Adjusts the output level of the Receiver DT10 when using R mode.
R+M enable
Enables selection of R+M mode with the push-button on the Receiver DT10.
R+M
Adjusts the output level of the Receiver DT10 when using R+M mode.
Tone ind.
Activates acoustic indication tones when selected. Indication for pairing mode
and pairing is always heard even if
Tone ind.
is disabled.
Auto sleep
When
Auto sleep
is enabled the Receiver DT10 goes into sleep mode if the
Digisystem Microphone (transmitter), is turned off. This significantly reduces
the power consumption of the Receiver DT10. The Receiver DT10 automati-
cally starts again when you turn on your microphone.