User manual

10
Programmer DT05
How to read the scanner:
The scanner reads and draws the RSSI-value on the frequencies between
850 och 872 MHz. (RSSI = Received Signal Strength Indicator)
The white horizental line indicates an average value of RSSI over the whole
frequency range.
Use the graduation bar to the right to determine how strong the interference
is. If the level of interference is above the green field, the Receiver DT10’s
ability to receive the signal from the transmitter will be reduced.
To facilitate the reading you can press the pairing button for 3 seconds. Then
the drawing will freeze. Just press the button again to restart the scanning.
RSSI graph
Lower
frequency
Upper
frequency
RSSI average
value over
the whole
frequency
range
Graduation of
interference