Submittal Sheet

Note:
1
A blower time delay relay is
required to achieve AHRI rating.
This feature is standard on all
furnaces and AH products.
2
Certified in accordance
with Unitary Air Conditioner
Certification Program, which
is based on AHRI Standard
210/240.
3
For lines 25 ft. or over, use 7/8”.
4
For lines 25 ft. or over, use 1-1/8”.
Equipment is charged for 15 ft.
of lineset.
Please refer to the IOM for
charging instructions.
Increase refrigerant charge by
.6 oz. per ft. over 15 ft. based on
3/8 copper.
Outdoor Model
Indoor
Model
SEER EER
Rated
ARI
Capacity
2
BTUH
Rated
Sensible
Capacity
BTUH CFM
Refrigerant
Connection
Refrigerant
Line Size
Air Handler
1
Outdoor Indoor
Suction
Liquid
Suction
Liquid
Suction
Liquid
RSG1318S1M
HMG24F1M
13.0 11.0 17,600 13,380 650 3/4 3/8 3/4 3/8 3/4 3/8
HMG24X1M
14.0 11.0 17,600 13,380 650 3/4 3/8 3/4 3/8 3/4 3/8
HCG24V1M
14.0 11.0 18,000 13,380 650 3/4 3/8 3/4 3/8 3/4 3/8
RSG1324S1M
HMG24F1M
13.0 11.0 22,800 17,330 800 3/4 3/8 3/4 3/8 3/4 3/8
HMG24X1M
14.0 11.0 22,800 17,330 800 3/4 3/8 3/4 3/8 3/4 3/8
HCG24V1M
14.0 11.0 23,000 17,330 800 3/4 3/8 3/4 3/8 3/4 3/8
RSG1330S1M
HMG30F1M
13.0 11.0 28,000 21,000 1000 3/4 3/8 3/4 3/8 3/4 3/8
HMG30X1M
14.0 11.0 28,000 21,000 1000 3/4 3/8 3/4 3/8 3/4 3/8
HCG36V1M
14.0 11.0 29,000 21,000 1000 3/4 3/8 3/4 3/8 3/4 3/8
RSG1336S1M
HMG36F1M
13.00 10.50 34,000 24,800 1200 3/4 3/8 7/8 3/8 3/4
3
3/8
HMG36X1M
14.0 11.0 34,000 24,800 1200 3/4 3/8 7/8 3/8 3/4
3
3/8
HCG36V1M
13.50 11.00 34,000 24,800 1200 3/4 3/8 7/8 3/8 3/4
3
3/8
RSG1342S1M
HMG42F1M
13.0 11.0 40,000 29,200 1400 7/8 3/8 7/8 3/8 3/4
3
3/8
HMG42X1M
14.0 11.0 40,000 29,200 1400 7/8 3/8 7/8 3/8 3/4
3
3/8
HCG42V1M
13.5 11.5 40,000 29,200 1400 7/8 3/8 7/8 3/8 3/4
3
3/8
RSG1348S1M
HMG48F1M
13.00 11.00 47,000 34300 1600 7/8 3/8 7/8 3/8 7/8 3/8
HMG48X1M
14.0 11.0 47,000 34300 1600 7/8 3/8 7/8 3/8 7/8 3/8
HCG48V1M
13.50 11.00 47,000 34300 1600 7/8 3/8 7/8 3/8 7/8 3/8
RSG1360S1M
HMG60F1M
13.00 11.00 57,000 41000 1800 7/8 3/8 7/8 3/8 7/8
4
3/8
HMG60X1M
13.5 11.0 57,000 41000 1800 7/8 3/8 7/8 3/8 7/8
4
3/8
HCG60V1M
13.50 11.00 57,000 41000 1800 7/8 3/8 7/8 3/8 7/8
4
3/8
COOLING PERFORMANCE WITH AIR HANDLERS AND FURNACES
SP-5C 6/17 CA-RSG13M_SPEC
Due to ongoing product improvements, specications and dimensions are subject to change and correction without notice
or incurring obligations. Determining the application and suitability for use of any product is the responsibility of the installer.
Additionally, the installer is responsible for verifying dimensional data on the actual product prior to beginning any installation preparations.
Third party incentive and rebate programs have precise requirements as to product performance and certication.
All products meet applicable regulations in effect on date of manufacture; however, certications are not necessarily granted for the life of a product.
Therefore, it is the responsibility of the applicant to determine whether a specic model qualies for these incentive/rebate programs.