User Guide

10
Design Guide - HZH/HZV Series
HZ Series Nomenclature
Note: Above model nomenclature is a general reference. Not all congurations are available on all models. Consult engineering submittal for detailed information.
ClimaDry II Option Notes:
Unit minimum entering air temperature when in dehumidication or cooling mode is 65°F DB. Operation below this minimum may result in nuisance faults.
A themostat with dehimidication mode or a thermostatand separate himidistat or dehumidistat is required for activation and control of ClimaDry II.
Submittal Data - HZ Series
TE Series Nomenclature
NOTES:
1. Residential class units come standard w/75 VA
transformer stainless steel drain pan, ECM motor, and
two stage scroll compressors. Units are painted polar ice.
2. Flow controller comes standard with variable speed
pump, ushing valves, and expansion tank. Internal
ow controller is only available when digit 12 option is
selected for copper coax.
3. Motorized valve is two way modulating. If digit 11 is option
"5", digit 12 must be option "C" or "A". If digit 11 is option
"6" digit 12 must be "N" or "J".
10