Comfort Aire HAGV Brochure

ManualsBrandsComfort-Aire Manualsair handlers electric furnaces2.5 to 3 Ton Variable Speed Air Handler

HAGV AIR HANDLER WITH OPTIONAL ELECTRIC HEAT 1

/2 - 5 TONS

HAGV AIR HANDLER

208/240V

For R-410A

LISTED

The HAGV Series uses an ECM

(Electronically Commutated Motor) to

run the blower. These brushless DC

motors with built-in inverters are ultra-high

efciency for lower operating costs. They

are also quieter than PSC motors.

Matched to HCI Condensers & Heat Pumps

Can reach 13-14 SEER when properly matched

Multi-Position Design

Ships upow, horizontal-left and can be easily

converted to horizontal-right airow without

additional parts

Drain Pan Flexibility

Durable, non-corrosive drain pans have

primary and 3/4" secondary openings for right

or left connections, meets ASHRAE standard

for IAQ

Factory Installed A-Coil

Units are A/C ready with installed coil equipped

with R-410A thermal expansion valve

Blower Time Delay Relay

Increases cooling efciency

Slide-Out Blower Assembly

Speeds service and maintenance

Cabinet Insulation

Reduces blower motor noise

Installation Convenience

Can be installed with zero clearance to

combustible materials (30" front clearance

required for maintenance)

Refrigeration Coil Connections

Swaged and factory sealed to maintain

nitrogen holding charge

Durable Cabinet

22 gauge galvanized steel cabinet for

maximum corrosion protection

Electric Heat

Heater kits are available for all HAGV models

Summary of content (4 pages)

PAGE 1
HAGV AIR HANDLER WITH OPTIONAL ELECTRIC HEAT 11/2 - 5 TONS Matched to HCI Condensers & Heat Pumps Can reach 13-14 SEER when properly matched Multi-Position Design Ships upflow, horizontal-left and can be easily converted to horizontal-right airflow without additional parts Drain Pan Flexibility Durable, non-corrosive drain pans have primary and 3/4" secondary openings for right or left connections, meets ASHRAE standard for IAQ Factory Installed A-Coil Units are A/C ready with installed coil equipped with
PAGE 2
HAGV AIR HANDLER SPECIFICATIONS CONDENSING UNITS 208/240V COOLING CAPACITY REQUIRED (BTU/H) CFM AIR HANDLER NOMINAL TONS SEER EER RSG1318 HAGV24-00-1A 1.5 14.0 12.00 18,000 600 RSG1324 HAGV24-00-1A 2.0 14.0 11.80 23,800 800 RSG1330 HAGV36-00-1A 2.5 14.0 12.00 29,200 1000 RSG1336 HAGV36-00-1A 3.0 14.0 12.00 36,000 1200 RSG1342 HAGV48-00-1A 3.5 14.0 12.00 42,000 1400 RSG1348 HAGV48-00-1A 4.0 14.0 12.00 48,000 1600 RSG1360 HAGV60-00-1A 5.0 13.5 11.
PAGE 3
ELECTRIC AIR HANDLER BLOWER PERFORMANCE MOTOR@240V 60Hz MODEL HAGV24-00-1A HAGV36-00-1A HAGV48-00-1A HAGV60-00-1A HP AMPS 1/2 (1) DWDI BLOWER (DxW) 4.3 3/4 6.8 CFM @ ESP (in. W.O.) * / ECM MOTOR AMPS MOTOR SPEED 0.1 0.2 0.3 0.4 0.5 10 x 7 A B C D 1422/1.69 1215/1.02 898/0.58 865/0.44 1421/1.73 1214/1.11 989/0.64 865/0.51 1421/1.79 1214/1.19 989/0.71 865/0.57 1416/1.95 1214/1.27 982/0.78 864/0.64 1415/2.03 1208/1.39 969/0.85 858/0.69 12 x 9 A B C D 1957/1.90 1576/1.10 1495/0.
PAGE 4
HAGV SPECIFICATIONS REF. CONN. SIZES FILTER SIZE (IN.) HEATER kW RANGE MAX. SHIPPING WT. WITH COIL (lbs.) HAGV24-00-1A 3/8 x 3/4 16 x 20 x 1 0-10 152 HAGV36-00-1A 3/8 x 3/4 16 x 20 x 1 0-15 152 HAGV48-00-1A 3/8 x 7/8 16 x 20 x 1 0-20 213 HAGV60-00-1A 3/8 x 7/8 16 x 20 x 1 0-20 213 MINIMUM CIRCUIT AMPACITY 240V 208V MAX. FUSE OR BREAKER (HACR) 240V 208V MODEL ELECTRIC HEATER KIT SPECIFICATIONS kW@ MODEL USED WITH 240V N/A without heat 0 0 5.4 5.4 10 10 5 3.8 30.3 26.