Brochure

Tubular Heat Exchanger
The heart of the furnace, the heat
exchanger is made of heavy gauge
aluminized steel, and carries a 20-year
warranty
Hot Surface Igniter
Quiet and automatic, it
eliminates the need for a
standing pilot light for
improved efficiency
In-Shot Burner
Engineered to deliver to most efficient
air/gas mixture, it allows heat to be
generated efficiently
30 Second Blower Delay
Delay at furnace start-up allows time for
duct temperature to warm to alleviate
cold blow when furnace turns on; blower
off settings can be set at 60, 90, 120 or
180 seconds
Durable Cabinet
Steel cabinet has attractive corrosion-
resistant finish; two- piece door provides
easy access to components
Space Saving, Energy Saving Gas Heat Source
Induced Draft Blower
Designed specifically to work with the
tubular heat exchanger, it pulls hot
combustion gases through the exchanger
until the burner cycles off; heated air is
locked in while cold air is locked out
Diagnostic Lights
Simplifies troubleshooting with a
dedicated light for flame signal strength,
and specific combinations for other fault
codes, eliminating the need to count
flashes
Integrated Control Board
Combining all controls and functions into
one board makes the furnace easy to
install, and is designed to accept options
such as an electronic air cleaner
Color-Coded Wiring Harness
Harness and quick connect fittings make
it easy to service or replace components
Multi-Speed
Direct Drive Blower
Direct drive blower delivers warm,
filtered air through the ductwork to each
room and also covers a wide range of
cooling capacities; switches on PCB
make it easy to select motor speed
NOTE: Upflow model is pictured; features of
the downflow model are identical although
component arrangement differs.
A.F.U.E. Ratings of 80% or better mean energy savings for you!
Upflow/Horizontal Models—For utility room, closet, alcove,
crawl space, attic or basement applications.
Downflow Models—For homes without a basement or
crawlspace; can be used in utility room, closet, attic or similar
space.
7
Upow/Horizontal & Downow Gas Furnaces
All models can be converted by a qualified distributor or local
service dealer to L.P. (propane) gas with a simple burner orifice
and regulator spring change. Factory approved kits must be
used to convert from natural to L.P. gas.