Remote Control Manual

Remote Controller Manual - DVC/DVH 09/12/18/24 Series
7
7
7
How to use the buttons
Cooling /Heating/Fan operation
Ensure the unit is turned on and power is
available.
1. Press the MODE button to select COOL,
HEAT or FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature.
3. Press the FAN button to select the fan speed
in four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air
conditioner.
The temperature can
O OO
be set within a range of 62 F~ 86 F in 1 F
increments.
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
NOTE
Auto operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can be
set within a range of 62 F~ 86
O O
F in 1 F
O
increments.
3. Press the ON/OFF button to start the air
conditioner.
1. In the Auto mode, the air conditioner will logically
choose Cooling, Fan, or Heating
by sensing the difference between the actual
ambient room temperature and the set temperature
on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It is automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
NOTE
MODE
FAN
TEMP
ON/OFF
TIMER
ON
TIMER
OFF
4
1
3
2
MODE
FAN
TEMP
ON/OFF
SILENCE
FP
SILENCE
FP
TIMER
ON
TIMER
OFF
3
1
2
LED FOLLOW
ME
LED FOLLOW
ME
TURBO SELF
CLEAN
TURBO SELF
CLEAN
SWING DIRECT
SWING DIRECT
SLEEP
SLEEP
VMH 09/12/18/24 SU/30 SD Remote Controller Heat Controller
Remote Controller Manual - DVC/DVH 09/12/18/24 Series