Smartphone Kit Guide

NETWORK CONFIGURATION

Caution:

Make sure the Android or iOS device wireless function

can connect back to your original

wireless network automatically.

NOTE:

You must finish all the steps in 8 minutes after powering on

air conditioner, otherwise you will need to repeat the setup.

1. Make sure your mobile device has already been

connected to the wireless network you intend to use.

Note: It may be necessary to forget other networks as

these may interfere with the configuration process.

2. Disconnect power supply to the air conditioner

at the breaker panel or exterior disconnect switch.

3. Reconnect the power supply and press the "LED DISPLAY" or

"DO NOT DISTURB" button seven times within ten seconds.

4. When the display shows "AP" the unit is in setup mode.

page 4

Select the appliance you are

setting up

Press "Add Device

Configuring to an Android device