Smartphone Kit Guide

1. Make sure your mobile device has already been
Note: It may be necessary to forget other networks as
2. Disconnect power supply to the air conditioner
at the breaker panel or exterior disconnect switch.
3. Reconnect the power supply and press the "LED DISPLAY" or
"DO NOT DISTURB" button seven times within ten seconds.
4. When the display shows "AP" the unit is in setup mode.
page 8
Configuring to an iOS device
Press "Add Device
Select the appliance you are setting up
these may interfere with the configuration process.
connected to the wireless network you intend to use.
8