User Manual for Smartphone Kit # 7800-208 Works with Ductless Mini-Split Models: B-SVH09SB-0 B-SVH09SB-1 B-SVH12SB-0 B-SVH12SB-1 B-SVH18SB-1 B-SVH24SB-1 B-DVH09SG-0 B-DVH09SG-1 B-DVH12SG-0 B-DVH12SG-1 B-DVH18SG-1 B-DVH24SG-1 B-VMH09SU-1 B-VMH12SU-1 B-VMH18SU-1 B-VMH24SU-1 B-KMH09SU-1 B-KMH12SU-1 B-KMH18SU-1 B-KMH24SU-1 IMPORTANT NOTE: Read this manual carefully before installing or connecting your Smart kit (Wireless module). Be sure to save this manual for future reference.
Contents SPECIFICATIONS 1 PRECAUTIONS 1 DOWNLOAD AND INSTALL APP 1 INSTALL SMART KIT (wireless module) 2 USER REGISTRATION 3 NETWORK CONFIGURATION Android 4 NETWORK CONFIGURATION iOS 8 HOW TO USE THE APP 12
SPECIFICATIONS Model: OSK102,EU-OSK103,US-OSK103 Standard: IEEE 802. 11b/g/n Antenna Type: Printed PCB Antenna Frequency : WLAN 2400~2483.5 MHz Operation Temperature:0 C~45 C/32 F~113 F Operation Humidity: 10%~85% Power Input: DC 5V/300mA Maximum Transmitted Power: 19.8dBm Max PRECAUTIONS Applicable system: iOS, Android. (Suggest: iOS 8.0 or later, Android 4.
INSTALL SMART KIT (wireless module) 1. Remove the protective cap of the smart kit (wireless module) 2. Open the front panel and insert the smart kit (wireless module) into the reserved interface. 3. Attach the QR device code packed with Smart kit (wireless module) to the side panel of the machine, ensure it is accessible to be scanned by your mobile phone. Alternatively, you can take a photo of the QR Code and save it into your phone.
USER REGISTRATION Please ensure your mobile device is connected to the wireless router and the wireless router is connected to Internet before performing user registration and network configuration.
NETWORK CONFIGURATION Caution: Make sure the Android or iOS device wireless function can connect back to your original wireless network automatically. NOTE: You must finish all the steps in 8 minutes after powering on air conditioner, otherwise you will need to repeat the setup. Configuring to an Android device 1. Make sure your mobile device has already been connected to the wireless network you intend to use.
Follow the above steps to enter "AP" mode 5
Choose "Scan QR code" Scan the code provided with your Smart Kit 6
Enter password Or choose the "manual setup" method Network configuration Successful Device is visible on the list 7 page 7
Configuring to an iOS device 1. Make sure your mobile device has already been connected to the wireless network you intend to use. Note: It may be necessary to forget other networks as these may interfere with the configuration process. 2. Disconnect power supply to the air conditioner at the breaker panel or exterior disconnect switch. 3. Reconnect the power supply and press the "LED DISPLAY" or "DO NOT DISTURB" button seven times within ten seconds. 4.
Follow the above steps to enter "AP" mode 9
Connect to the wireless network Network configuration Successful Enter password Your device should be visible on the list page 10 10
NOTE: When finishing network configuration, APP will display success cue. If the device status displays "offline", refresh the device list on the APP and verify that status returns to "online". Alternately, user can power down the unit, re-apply power, and the device status should return to online status after a few minutes.
HOW TO USE THE APP Please ensure both your mobile device and air conditioner are connected to the internet before using app to control the air conditioner via internet.
You now should be able to control your device's on/off status, operation mode, temperature setting and fan speed as well as other settings, depending on your device. NOTE: Not all functions of this APP are available on every air conditioning unit Please check the equipment user manual for more information.
3/2020
