Remote Control Guide

Remote Controller Manual - DVC/DVH 09/12/18/24 Series
7
7
7
How to use the buttons
Cooling /Heating/Fan operation
Ensure the unit is turned on and power is
available.
1. Pre
ss the
MODE button to
select COOL,
HEAT or FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature.
3.
Press
the
FAN button to
select
the fan
speed
in four steps-Auto, Low, Med,or High.
4.
Press
the
ON/OFF button to
start
the
air
conditioner.
The temperature
can
O OO
be set withina range of62 F~ 86 F in 1 F
increments.
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
NOTE
Auto operation
Ensure the unitis plugged inand power is
available.
The OPERATION
indicator on
the
display panel
of
the indoor
unit
starts
flashing.
1.
Press
the MODE
button to
select Auto.
2.
Press
the UP/DOWN
button to
set the
desired
temperature.
The temperature
can be
set within
a range
of 62 F~
86
O O
F in 1 F
O
increments.
3.
Press
the ON/OFF button
to
start
the
air
conditioner.
1. In the Auto mode, the air conditioner will logically
choose Cooling, Fan, or
Heating
by sensing the difference between the actual
ambient room temperature and the set temperature
on the remote
controller.
2. In the Auto mode, you cannot switch the fan speed.
It is automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
NOTE
MODE
FAN
TEMP
ON/OFF
TIMER
O
N
TIMER
O
FF
4
1
3
2
MODE
FAN
TEMP
ON/OFF
SILENCE
FP
SILENCE
FP
TIMER
O
N
TIMER
O
FF
3
1
2
LED FOLLOW
ME
LED
F
OLLOW
ME
TURBO SELF
CLEAN
TURB
O S
ELF
CLEAN
SWING DIRECT
SWING DIRECT
SLEEP
SLEEP
VMH 09/12/18/24 SU/30 SD Remote Controller Heat Controller
Remote Controller Manual - DVC/DVH 09/12/18/24 Series