User Guide

IOM - Horizontal/Side Discharge Condensing Units
7
Horizontal/Side Discharge Condensing Units
OUTDOOR UNIT INSTALLATION continued
Clearances
1. Ensure that there is sufcient clearance
around the unit for installation and maintenance.
Clearance must be maintained to ensure that the
air inlets and outlets are not obstructed.
[See Fig. 4].
Anchor the outdoor unit with a 10mm (3/8 inch)
diameter bolt and nut tightly on a concrete or
rigid surface [See Fig. 5]. Anchoring is especially
recommended in seaside/high wind applications
and/or areas prone to earthquakes.
LQFK
LQFK
LQFK
LQFKHV
Fig. 4
Fig. 5
1. Split type outdoor unit clearances
1. Split type outdoor unit dimensions
Units in inches
Applicable for 12-36 Applicable for 48
7