Brochure

Warranty—7 years on compressor, 2 years on parts
(Some limitations apply; see printed warranty for details.)
optional wired thermostat
‘VMH’ UltraV SERIES
Single Zone Ductless Mini-Splits
Now–heating & cooling at extremely
low ambient temperatures!
Our new UltraV Series features a wide operating range with
higher capacities in low temperatures. This allows the unit to
operate in the cooling or heating mode with 100% output
even when the outdoor temperature is 0
o
F.
With this broad ambient range, the units are well suited to
installations requiring year ‘round conditioning, both residential
and light commercial. Operating range:
Cooling -22
o
to 122
o
F
Heating -22
o
to 86
o
F
Advanced inverter technology means the room will reach the
preset temperature quickly and that the temperature will be
constant without the uctuations that occur in other systems
due to on-off cycling. Energy usage is kept to a minimum as
units run at low frequency most of the time. However, when
required the unit ramps up automatically to reach and maintain
the comfort level
Features
n Multiple Modes—Cooling, dehumidication only,
and heating
• Sleep mode • 24-hour timer
• Turbo mode • Auto mode
n Auto Swing—Continually adjusts air ow direction
for a gentle, breeze-like effect
n Remote Control—Makes it easy to program and
operate the unit
n Enhanced Filtration—Gold n lter delivers
improved indoor air quality
n Defrost Control—Longer defrost cycle effectively
removes any frost accumulation on the coil as
needed
n “Follow” Feature—Remote senses temperature
where occupant is, automatically adjusts to
maintain setpoint
n Twin Rotary Compressor—Designed for wide
operating range and minimal vibration
SP-2M 2/17 CA-VMH-SU
Indoor Unit
Outdoor Unit
Due to ongoing product improvements, specications and dimensions are subject to change and correction without notice or incurring obligations.
Determining the application and suitability for use of any product is the responsibility of the installer.
Additionally, the installer is responsible for verifying dimensional data on the actual product prior to beginning any installation preparations.
Third party incentive and rebate programs have precise requirements as to product performance and certication.
All products meet applicable regulations in effect on date of manufacture; however, certications are not necessarily granted for the life of a product.
Therefore, it is the responsibility of the applicant to determine whether a specic model qualies for these incentive/rebate programs.