Install Instructions

Installation Manual - B-VMH18,24UU-1
6
4 Wall Mounting Installtion
3 Ceiling Installation
Locate the hanging arm on the hanging screw bolt.
(Refer to Fig. 5-9)
Screw nut
Washer
Hanging
screw bolt
Hanging arm
Fig.5-9
20～25mm
Fig.5-7
STEEL ROOF BEAM STRUCTRUE
Hanging screw bolt
Hanging
bolts
Supporting
angle steel
Install and use directly the supporting angle steel.
2 Install the indoor unit.
Fig.5-4
Fig.5-5
Fig.5-6
Fig.5-7
NEW CONCRETE BRICKS
FOR ORIGINAL CONCRETE BRICKS
Steel bar
Embedding screw bolt
(Pipe hanging and embedding screw bolt)
(Blade shape
insertion)
(Slide insertion)
Inlaying or embedding the screw bolts.
Install the hanging hook with expandable bolt into the
concrete at a depth of 1-3/4" to ~2" to prevent loosening.
Remove the side board and the grille.(Refer to Fig. 5-8)
Side board
Grille
Hanging arm
Hanging
screw bolt
20mm
Fig. 5-10
Fig. 5-11
Fig. 5-12
D. Connecting point of
refrigerant pipe
(D.gas side)
Drain point
Downward declicity lower between(1-2)/100
E. Connecting point of
refrigerant pipe
(E. Liquid side)
Fig. 5-8