User Guide

Owner’s Manual - SVH 09/12/18/24 Series
8
Unit
Specifications
and Features
 Page 8 
For a detailed explanation of each function,
refer to the Remote Control Manual.
Other Features
•
•
Auto-Restart
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
• Anti-mildew (some units)
When turning o the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner will
continue operate at very low power to dry up
condensed water and prevent mildew growth.
• Louver Angle Memory(some units)
When turning on your unit, the louver will
automatically resume its former angle.
• Refrigerant Leakage Detection (some
units)
The indoor unit will automatically display “EC”
For a detailed explanation of your unit’s
advanced functionality (such as TURBO
mode and its self-cleaning functions),
refer to the Remote Control Manual.
The “timer” indicator light turns o and
the “run” indicator light ashes 7 times
when the unit detects refrigerant leakage.
Air Filter Reminders (some units)
Air Filter Cleaning Reminder
After 240 hours of use, the “run” &
“timer” indicator lamps on the indoor
unit will ash simultaneously and the
display window on the indoor unit will
ash
“CL” (if applicable). This is a
reminder to clean your lter. After 15
seconds, the unit will revert to its
previous display.
To reset the reminder, press the LED
button on your remote control 4 times,
or press the MANUAL CONTROL button 3
times. If you don’t reset the reminder,
the
“CL”, “run” & “timer” indicator
lamps will ash again when you restart
the unit.
Air Filter Replacement Reminder
After 2,880 hours of use, the “run” &
“timer” indicator lamps will flash
simultaneously 10 times, then remain on
for five seconds,and
the display window
on
the indoor unit will flash “nF”(if
applicable)
. This is a reminder to replace
your filter. After that, the unit will revert
to its previous display.
To reset the reminder, press the LED
button on
your remote control 4 times,
or press the
MANUAL CONTROL button 3
times. If you don’t reset the reminder, the
“nF”, “run” & “timer” indicator lamps will
flash again when you restart the unit.