User Manual

OPERATION

Press "0/Memory" to program and choose up to three cooking procedures.Each

procedure will be indicated by 1, 2 or 3 in the display.

Press "0/Memory" until your desired procedure number appears in the display.

Press to begin it. A maximum of two cooking stages can be

set for each

procedure.

To program a procedure, follow the steps listed below. Example: Cook food at

80% Power Level for 3 minutes and 20 seconds; save as memory 2.

14. MEMORY FUNCTION

(1)

(2)

(3)

Press Memory twice; screen displays 2.

Press "Time Cook" , then press "3" , "2" and "0" in order.

Press "Power" once, then press "8" for "PL 8" to display.

Press to save the procedure. Oven beeps once.

Or press twice directly to save and start cooking.

To choose the procedure from the memory list, press Memory twice.

Screen will display "2". Press to run procedure.

NOTE:

Auto Menu cannot be set in Memory function.

It is default that the buzzer sounds is open.In waiting state, long pressing on number

turns off the sound.

When the sounds turn off, long pressing on 8 for 3 seconds, it sounds a long beep

and the sound turn off. All the buttons has no beep when they are pressed, including

the ending cooking sounds is turn off too.

Note: All m odels has m ute function and energy-saved function.

This function can work under lock function too.

15. TURN ON/OFF THE BUZZER SOUND

EN-22

8 for 3 seconds, it sounds a long beep,

"START/+30SEC."

"0/ "