Other

File E214180 Vol. 1 Sec. 16 Page 26 Issued: 2007-10-02
and Report New: 2015-05-22
ALTERNATE CONSTRUCTION - MODEL EM720D##-P0 – FIGS. 22 & 23
General – Model EM720D##-P0 employs the alternate construction as below.
Fig. 22 shows the rear view and Fig. 23 shows the bottom view. It’s identical
to the previous construction of EM720D##-P0 described in Figs. 18 & 19 except
for the following items.
1. Rear Enclosure – Painted steel, 0.5 mm thick. Secured to oven cavity and
bottom enclosure by either riveting, spot-welding, or by screws.
Measures approximately 432 mm wide by 236 mm high. Provided with hole at
top of the rear enclosure for placement of strain relief. See Ill. 14
for openings and dimensional details.
2. Bottom Enclosure - Plated steel, 0.5 mm thick, measuring 432 mm by 258
mm. Secured to Cavity frame by screws. See Ill. 15 for openings and
dimensional details.