Other

File E214180 Vol. 1 Sec. 16 Page 22B Issued: 2007-10-02
and Report Revised: 2015-11-20
ALTERNATE CONSTRUCTION FOR MODEL E(A)M720C##-PM – FIGS. 15B & 15C
General – Model E(A)M720C##-PM employs the alternate construction as
below. Fig. 15B shows the rear view and Fig. 15C shows the bottom view. It’s
identical to the previous construction of E(A)M720C##-PM described in Fig. 15A
except for the following items.
1. Rear Enclosure – Painted steel, 0.5 mm thick. Secured to oven cavity and
bottom enclosure by either riveting, spot-welding, or by screws.
Measures approximately 432 mm wide by 236 mm high. Provided with hole at
top of the rear enclosure for placement of strain relief. See Ill. 14
for openings and dimensional details.
2. Bottom Enclosure - Plated steel, 0.5 mm thick, measuring 432 mm by 258
mm. Secured to Cavity frame by screws. See Ill. 15 for openings and
dimensional details.
3. Turntable Motor – R/C (XEIT2/8), Foshan Shunde Hengxing Micro Motor Co
Ltd (E199324). Model TYJ50-8A19, rated 120 V, 36 mA, Class A insulation,
locked-rotor temperature at 150 C.
Alternate – Same as above except R/C (XEIT2/8), GUANGDONG MIDEA KITCHEN
APPLIANCES MFG CO LTD (E305803), Model TB-49-16-8-15, rated 100-127 V, 4
W, class B (Engineering Note: maximum evaluated lock rotor temperature
175C, refer to File E214180, Vol. 1, Sec. 10, date 2004-11-27, TR No.
52).