Other

File E214180 Vol. 1 Sec. 16 Page 20B Issued: 2007-10-02
and Report New: 2012-11-08
ALTERNATE CONSTRUCTION FOR MODEL E(A)M720D## – FIG. 11D
General – Fig. 11D shows the alternate construction for Model
E(A)M720D##. It’s identical to the previous construction of E(A)M720D##
described in Figs. 10, 11, 11A, 11B, 11C except for the following items.
1. Microwave Guide Inlet Opening - Inlet opening measures 86 mm wide by 44
mm high, located on the cavity right side wall, spaced to the Cavity
Front Plate 88 mm, and the bottom line of Cavity 39 mm. Provided with a
mica, measured 64 mm by 116 mm, min 0.35 mm thickness. Secured by
integral tabs and a plastic screw to the side wall of Cavity.
2. Oven Cavity – Epoxy painted, minimum 0.4 mm thick. Either spot-welded
or riveted to oven cavity front plate and rear enclosure. Cavity
dimensions are maximum measurements and may not accurately indicate the
total cavity volume.
Oven Cavity Sizes
(L)
Oven Cavity Max Dimensions (mm)
Width
Height
Depth
20
307
215
307