Other
File E214180 Vol. 1 Sec. 16 Page 16 Issued: 2007-10-02
and Report Revised: 2019-01-31
DOOR ASSEMBLY EM720C## - FIG. 8
General - This figure shows the door assembly. Represents all models
unless otherwise indicated.
1. Outer Viewing Screen – Reinforced PET film, 0.25 mm thickness measuring
259 mm by 175.5 mm. Secured to Outer Door Fame by plastic tab.
Manufactured by Shanghai Huazhou Fangyin Packing Material Company.
Alternate – Same as above except Glass of 0.3 mm thick with various
shapes.
2. Door Panel – R/C (QMFZ2), rated HB minimum. Measuring 351 mm by 238.5
mm by 31.1 mm, The door window is glass, various shapes or for
decoration, stainless steel plate could be provided; secured to door
frame by integral tabs.
3. Door Frame – Painted steel, minimum 0.5 mm thick measuring 330.4 mm by
226.6 mm. Provided with 1.5 mm diameter openings in the middle of the
door as a view window.
4. Inner Viewing Screen Barrier - PET film measuring 0.1 mm thick.
Manufactured by Shanghai Huazhou Fangyin Packing Material Company.
Covers all openings in viewing area of inner door frame and secured to
inner side of door frame by acrylic adhesive.
5. Choke Cover & Choke Cover Baffle - R/C (QMFZ2), rated HB minimum.
1.2 mm thick measuring 343.2 mm by 233.7 mm by 11.7 mm. Secured to the
door frame by integral tabs.
6. Door Latch Mechanism - R/C (QMFZ2), POM, type N2320-003 manufactured by
BASF AKTIENGESHELLSCHAFT, rated HB minimum and 90 ℃ (E41871). 2 mm
thick for latch parts and measuring 98 mm by 47.6 mm by 10.4 mm.
Actuated by coil return spring and linkage with door interlock system.
For the details figure, refer to Ill. 3 (Pull-out type door models) and
Ill.4 (push button type models).
SUPER-DRAGON ENGINEERING PLASTICS CO LTD (E201164), Type FRPP410+, rated
V-0 and 65C
7. Spring – 0.6 mm OD thick steel wire measuring 6.0 mm OD and 31mm
long. Secured to door frame by steel tab and Door Latch by plastic tab.
For the details figure, refer to Ill. 3 and 4.
8. Door Assembly Hinges – Steel, two provided. Secured to tabs of the inner
door frame. Inserts in door hinges. Top door hinge, “Z” shaped,
measuring 26 mm wide by 28 mm high by 73 mm long 1.5 mm thick. Provided
with holes for insertion of door hinge and secured to oven cavity by
screws. Bottom door hinge, measures 20 mm wide by 80 mm long by 2.0 mm
thick. Provided with holes for insertion of the door hinge and secured
to oven cavity by screws. Extends along the inside of the oven cavity
front plate and measuring approximately 20 mm long.