Other

File E214180 Vol. 1 Sec. 16 Page 13C Issued: 2007-10-02
and Report Revised: 2015-01-05
SIDE VIEW OF MODELS MM720C##-PM WITHOUT COVER - FIG. 5C
General – Fig. 5C shows the right side view without outer enclosure for Model
MM720C##-PM. MM720C##-PM is identical to E(A)M720C##-PM except for the
following items. Also represents other models unless otherwise specified.
1. Oven Cavity Thermostat - R/C (XAXP2/8), CHANGSHU XIN DU AN ELECTRIC CO
LTD, Type KSD1-110, rated 125 V, 15 A. (E186242, dated 1997-11-15)
temperature limiting type, calibrated to open at 110 C. Secured to
upper part of oven and prevented from moving by screws. Terminals of
unit are insulated upon connection of mating terminal.
Alternate – Same as above except Jiangsu Changheng (Group) Co., Mode.
NO. KSD110LC rated 125 V, 15 A, calibrated to open at 110 C.(E206735
2000-08-01)
Alternate – Same as above except, Nanhai Xicheng Tianpeng Electric Co
Ltd, Model KSD201/PPS or KSD201/EC, rated 125V, 15A, calibrated to open
at 110 C; limiting type. (E202192, 2002-07-18).
Alternate - Same as above except, Foshan Tianpeng Thermostats Co.,
Ltd(E202192), Model KSD201, rated 125V, 15A, limiting type.
Alternate - Same as above except R/C (XAPX2/8) FOSHAN LIANHEHUILONG
ELECTRICAL APPLIANCE CO LTD (E349305), Model KSD301, limiting type,
rated 125/250V, 16A.
*2. High Voltage Transformer - Model MD-701AMR-1, rated 120 V, 60 Hz, by
GUANGDONG MIDEA KITCHEN APPLIANCES MFG CO LTD, provided with Recognized
Component insulation system(OBJY2), designated, BWL-R(E306927), Class 220
(R) by GUANGDONG MIDEA KITCHEN APPLIANCES MFG CO LTD. For the details
on, refer to File E214180, Vol. 3, Sec. 4.
Transformer Model
Core Dimensions, (mm)
Transformer Winding Diameter, (mm)
Primary
Secondary
MD-701AMR-1
62 by 76.5 by 90
1.3 mm/0.68 ohm
0.33mm/200ohm
3. Magnetron Thermostat Metal Support – (Optional; Employed when the
optional Magnetron Thermostat is employed) Steel, measured 45 mm by 38
mm by 5 mm height, 0.5 mm thick. Secured to Magnetron by a screw and an
integral tab.
4. Steel Air duct – Steel. Measured 0.5 mm thick, overall 80 by 67 by
46 mm. Secured to Oven Cavity top side by integral steel tabs and a
screw.
Alternate – Same as above except measured 0.4 mm thick, overall 73 by 67
by 46 mm.